Pro-Ject 6 PerspeX SB Hi-Fi Turntable
No cartridge supplied, please contact us for our recommendations.
The 6 Perspex SB takes the same proven design as previous 6 Perspex designs, but utilises a far superior motor to give vinyl enthusiasts an even more appealing high-end vinyl spinner.
The perimeter drive-belt mechanism was inspired by the introduction of the RPM 10 Carbon turntable, which uses a fully-decoupled motor. With the 6 Perspex SB, the motor sits within its own cut-out inside the main plinth, lined with damping material for reduced resonance. The motor itself is an AC design, which is regulated by its own built-in speed controller. This speed controller not only offers easy switching between 33 and 45rpm, but it also generates an entirely fresh new sine wave for the motor – filtering out the fluctuations and distortions associated with a typical mains supply, for reduced resonance.
The 6 Perspex SB stands out as a beautifully engineered machine thanks to the pristine acrylic plinth, which is accented by the striking sub-chassis, platter and TPE-damped aluminium coned feet, as well as the new motor.
|Manufacturer Link||Pro-Ject 6 PerspeX Hi-Fi Turntable|
|Free warranty||2 years|
|Delivery Time||1 - 5 Working Days|
|Nominal Speeds:||33 / 45 RPM (Electronic)|
|Sub-Chassis:||Magnetically Supported Corian|
|Platter:||300mm Sandwich-Type (2kg)|
|Turntable Feet:||Aluminium (Sorbothane-Damped)|
|Wow & Flutter:||±0.10%|
|Signal to Noise:||-73dB|
|Tonearm:||Pro-Ject 9CC Evolution|
|Effective Tonearm Length:||9" (230mm)|
|Effective Tonearm Mass:||8g|
|Supplied Counterweights:||For Cartridges Weighing...
5-7g, 7-10g, 9-11g & 10-14g
|Downforce Range:||10 - 35mN|
|Outboard Voltage:||15V / 800mA DC|
|Power Consumption:||6W / <0.3W (Standby)|
|Included Accessories:||Dust Cover, Record Clamp, RCA Cables|
|Dimensions:||460 x 183 x 365mm|