Pro-Ject RPM 1 Carbon Hi-Fi Turntable
Pro-Ject RPM 1 Carbon Hi-Fi Turntable
RPM 1 Carbon utilises a lot of innovations and enhancements: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. A completely new designed S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100 bar pressure, the arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges. Additional features are a new magnetic antiskating mechanism and a TPE-damped counterweight.
In the box:
- RPM 1 Carbon with Ortofon 2M Red
- Connect it E Phono Cable
- Felt mat
- Adapter for 7“ singles
- Power supply
- Allen key, stylus pressure gauge
Pro-Ject RPM 1 Carbon Hi-Fi Turntable
| Manufacturer Link | Pro-Ject RPM 1 Carbon Hi-Fi Turntable |
|---|---|
| Manufacturer | Pro-Ject |
| Free warranty | 2 years |
| Delivery Charge | Free |
| Delivery Time | Normally 1 - 5 Working Days (Covid-19 and Brexit Delays Possible, contact us for more information) |
| Card Surcharge | No |
Pro-Ject RPM 1 Carbon Hi-Fi Turntable
Features
- Precision belt drive using synchronous motor
- Ultra-precision DC-driven AC generator motor power
- Inverted platter bearing with ceramic ball
- Platter made from MDF using felt mat
- 8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments
- Magnetic antiskating
- Counterweight with TPE damping
- With Ortofon 2M Red cartridge
- 3 high-gloss colours (black, red, white)
| Speed | 33, 45 (manual speed change) |
| Drive principle | Belt drive |
| Platter | 300 mm MDF |
| Mains bearing | Stainless steel axle with ceramic ball |
| Wow & flutter | 33: +/- 0.27% I 45: +/- 0.1% |
| Speed drift | 33: +/- 0.14% I 45: +/- 0.13% |
| Signal to noise | - 71dB |
| Tonearm | 8.6” carbon; aluminium and resin |
| Effective arm length | 218.5 mm |
| Effective arm mass | 13.5 g |
| Overhang | 22 mm |
| Tracking force | 0 - 25mN |
| Included accessories | 15 volts DC / 500 mA power supply |
| Power connection | 110/240 Volt - 50 or 60 Hz |
| Power consumption | 5 watt max / < 0,5 watt standby |
| Dimensions | 380 x 110 x 350mm (WxHxD) |
| Weight | 3.8 kg net |
Pro-Ject RPM 1 Carbon Hi-Fi Turntable