During the Covid 19 period we are operating the showrooms as appointment only - click here to book.
PA 1000 E Integrated Amplifier
The core of the E-series is the PA 1000 E: an integrated amplifier bursting with power and superb sound. The unit was developed from the legendary Power Plant, whose outstanding sound we succeeded in improving further. The pre-amplifier is a crucial element in determining the sonic characteristics of the amplifier as a whole, and for this reason our development aim was absolute neutrality, superb musical fidelity and outstanding dynamic characteristics. The use of the latest op-amps (operational amplifiers) mounted on discrete, voltage-stabilised circuit boards (OAD = Op Amp Decoupling) ensures absolutely consistent signal processing regardless of load, i.e. uncoloured sound! Naturally there is a two-stage volume control based on a High-End ALPS precision potentiometer to ensure a high overload margin and good signal to noise ratios. A Flat switch is present, which entirely removes the sophisticated tone controls and Loudness function from the signal path.
The PA 1000 E is equipped with high-quality balanced and unbalanced inputs. The balanced input section (XLR) is mounted on its own circuit board, is of fully symmetrical construction, and is coupled directly to the pre-amplifier via differential amplifiers of superb quality. The RCA and XLR inputs are flexible in operation, and can be assigned to different source devices. The input selector switches incorporate gold-contact relays of outstanding quality in order to guarantee freedom from harmonic distortion and background noise.
Manufacturer | T+A |
---|---|
Free warranty | 3 years |
Delivery Charge | Free |
Delivery Time | 1 - 5 Working Days |
Card Surcharge | No |
Specifications
Specifications power-amplifier
- Nominal output per channel 4 Ohms / 8 Ohms
- 2 x 250 Watts / 2 x 140 Watts
- Peak output per channel 4 Ohm / 8 Ohm
- 2 x 400 Watts / 2 x 220 Watts
- Frequency response -3dB
- 1 Hz - 60 kHz
- Total harmonic distortion / Intermodulation
- < 0,004 % / < 0,004 %
Pre amplifier (PRE, REC)
- Frequency response
- 1 Hz - 300 kHz
- Total harmonic distortion
- 0,0025 %
- Signal / noise ratio
- 108 dBA
- Channel separation
- > 82 dB
- Inputs 5 x unbalanced (RCA)
- 250 mVeff ... 3 Veff / 20 kOhms
- Inputs 5 x balanced (XLR)
- 500 mVeff ... 6 Veff / 5 kOhms
- Outputs 2 x unbalanced (RCA)
- PRE OUT, REC OUT 2,5 Veff / 50 Ohms;
- Headphones 6,3 mm plug > 32 Ohms
Mains / Accessories / Dimensions
- plug-in phono module MM, 1 - 5 mV, 16 capacitance values
- plug-in phono module MC, 60 - 1000 µV, 16 impedance values
- Remote control
- via MP 1000 E or
- optional remote control set FBS2000
- Mains
- 220-230 V or 110-115 V, 50-60 Hz, 600 Watts
- Standby
- < 0,3 Watts
- Dimensions (H x W x D)
- 11,5 x 44 x 38 in cm
- Weight
- 14 kg
- Finishes
- Silver case + black side panels. Silver case + silver side panels.
- Black case + black side panels. Black case + silver side panels.
- Optional Accessories
- Technical modifications reserved