Pro-Ject Pre Box DS Pre-Amplifier

£299.00
In stock
See more Pro-Ject products.

At the heart of the Pre Box DS is a pure single-ended Class-A output stage design, which is a real high-end option for such an affordable pre-amplifier. The highly-shielded metal chassis also effectively rejects any vibration and electromagnetic noise, allowing the internal components to run smoothly and with as little interference as possible. When compared to its predecessor, the Pre Box S/E, the DS also offers sonic improvements. Most notable is the reduction of the very low-level hiss, which could appear when the S/E was used with low-level input signals. Thanks to the all-new circuitry, plus relay-controlled volume regulation (with close to perfect linearity and channel accuracy) and input selection, the Pre Box DS now runs clean and smooth - putting the music at the front of the performance, not the electronics. The Pre Box DS is supplied with a convenient IR remote for switching inputs and adjusting volume. If you're partnering the Pre Box DS with other Box Design source components, it may be worth considering purchasing the Control-IT system remote. The Pre Box DS is designed to sit perfectly with the Amp Box DS or Amp Box DS Mono power amplifiers to offer a rich, detailed, true Hi-Fi performance. A 12-volt trigger switch option is also provided so other components connected to the Pre Box DS can be power activated at the same time.
OR
More Information
Manufacturer Link Pro-Ject Pre Box DS Pre-Amplifier
Manufacturer Pro-Ject
Free warranty 2 years
Delivery Charge Free
Delivery Time 1 - 5 Working Days
Card Surcharge No
See more Pro-Ject products.

Pro-Ject Pre Box DS Pre-Amplifier

Key Features:

Improved circuitry with even less noise
Volume control through relays (64 steps, 1 dB)
4 line level inputs
Input switching relays
1x Pre-Out, 1x Subwoofer-Out, 1x Record-Out
Extremely low output impedance, for reduced signal-loss with long cables
IR remote control included
Trigger switching of power amplifiers
Large, easily-read control display
Metal casing protects against vibration and interference
Technical Data:

Frequency Response: 20Hz - 20kHz (± 0.2dB)
Noise Floor: -100dB (IEC - A)
THD: 0.0035%
Gain: 13dB
Pre-Out: 1 Pre-Out, 1 Sub-Out, 1x Rec-Out (RCA)
Output Voltage Typically: 1V @ 1kHz
Line-Level Inputs: 4 Pairs RCA/Phono Sockets
Input Impedance: 10kΩ
Trigger (Trigger Pre): 12V DC Switching Voltage
Trigger Out: 2-Pole, 2.5mm Co-Axial Jack
Outboard PSU: 18V / 500mA DC
Standby Power Usage: < 1W
Dimensions (W x H x D):

103 x 72 x 103mm
103 x 72 x 150mm (Incl. Sockets)
Weight: 1100g (Without PSU)

Pro-Ject Pre Box DS Pre-Amplifier

Call us about this product