Pro-Ject Amp Box DS Mono Power Amplifier

£449.00
In stock
See more Pro-Ject products.

The Amp Box DS2 Mono is built around a highly efficient, low-energy Class D amplifier module that delivers high output power, giving it the ability to drive even very demanding speakers. This simple yet effective single-channel power amplifier is capable of delivering a very clean, pure sound performance with minimal electrical interference.

The Amp Box DS2 Mono meets Pro-Ject’s exacting standards for sonic ability, which results in a spacious soundstage that picks up on fine dynamic details and provides plenty of power to fill a typical listening room with sound. The design team took inspiration from tube amplifiers when designing all their amplifiers, resulting in a realistic, musical performance.  The sophisticated internal design of the Amp Box DS2 Mono uses a four-layer PCB, which accounts for the noticeable upgrade in sound quality compared to the previous Amp Box DS.

For easy integration into a system, the Amp Box DS2 Mono has two isolated speaker terminals on the back panel, and a Loop Output for passing the audio signal onto another device. The trigger link allows for the amplifier to be turned on when a connected Pre Box DS2 is switched on, making operation even easier. The Amp Box DS2 Mono perfectly complements the DS2 pre-amplifier models, but its sound quality and efficiency also makes them viable for other types of systems.

  • TickAudiophile class D mono power amplifier
  • TickImpressive signal spectrum and lower distortion
  • TickHigh efficiency from mains to audio power
  • TickLow heat emission
  • TickLoop output (RCA)
  • TickIsolated speaker outputs
  • TickTrigger input & loop out
  • TickElegant aluminium - metal sandwich casing
More Information
Manufacturer Link Pro-Ject Amp Box DS Mono Power Amplifier
Manufacturer Pro-Ject
Free warranty 2 years
Delivery Charge Free
Delivery Time Normally 1 - 5 Working Days (Covid-19 and Brexit Delays Possible, contact us for more information)
Card Surcharge No
See more Pro-Ject products.

Power Output 1x 120W (8Ω)
1x 205W (4Ω)
Frequency Response 10Hz - 50kHz (+0dB, -3dB)
Channel Separation >40dB at 20kHz
THD <0.1% at 90W
Gain 31dB
Pre-amp Input 2x RCA (Bypass Input-Output)
Input Sensitivity 550mV (100W, 4Ω)
Input Impedance 10kΩ
Speaker Output 4mm Ø Banana
Spade
Bare Wires
Trigger 12V DC In & Out, 2-Pole Jack 2.5mm Ø
External Power Supply 48V / 2.5A DC
Power Consumption 2.5A DC
Standby Power < 1W
Dimensions 240 x 69 x 194mm
Weight (Without PSU) 1.9kg