Graham Slee Reflex C Phono Stage (w/ PSU1) - Second Hand

Special Price £635.00 £725.00
In stock
See more Graham Slee products.

We have a second hand Reflex C for sale. Sold with orginal box and packaging, this phono stage and PSU are in excellent condition, with only one very minor cosmetic blemish on the casing of the phono stage. Sold with a 1 year warranty.


You buy a moving coil cartridge for high-performance — so team it with a performance phono preamp for winning results!


The Reflex C is supplied with the PSU1 power supply, and a choice of voltages and power plugs; 100 Ω or 1k Ω input impedances; and there is also an option to have a mono switch fitted.

More Information
Manufacturer Link Graham Slee Reflex Phono Stage
Manufacturer Graham Slee
Free warranty 2 years
Delivery Charge Free
Delivery Time Normally 1 - 5 Working Days (Covid-19 and Brexit Delays Possible, contact us for more information)
Card Surcharge No
See more Graham Slee products.

The Reflex C is suited to low output moving coil (MC) with output in the region of 0.2 - 1.0 mV (ref 1kHz at 5cm/sec)

Cartridges having lower outputs may be used if you accept the risk of hearing more hiss than you may be comfortable with.

Your amplifier's volume control is intended to be set to give you the loudness you want and should be adjusted accordingly. With the lowest output cartridges you will need to turn the volume control higher than you would use with other sources such as a CD player.



Item Measurement
Input and output connectors RCA/phono sockets, hard gold plated
Input sensitivity range 0.2mV to 1.0mV (recommended)
Output range (for above inputs) 252mV to 1,260mV
Maximum input 3.9mV rms
Maximum output 4.914V rms
Gain 62dB (1,260) at 1kHz
Input impedance 100 Ω or 1k Ω to order
Output impedance (driving impedance) 1k Ohm (will drive 10k Ohms and above)
Noise at output -62dB CCIR Quasi-peak 20Hz to 20kHz
Distortion typically 0.02%
RIAA accuracy < 0.5dB
Frequency response 20Hz - 100kHz ("flat", corrected to RIAA)
Channel balance 0.2dB
Channel separation 60dB
Power supply remotely powered using PSU1 linear power supply
Size (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
Call us about this product