Rotel RA05SE Stereo Amplifier

Rotel RA05SE Stereo Amplifier

Small changes can make a big difference; and when those changes are to audio-critical components, that difference can be vast. So it is with the Rotel RA-05, where time spent tuning, upgrading and switching components has resulted in the RA-05 SE, a product that shares the original’s slim-line good looks and build quality, but takes its audio performance to the next level.

Continuous Power Output
(20-20 kHz, < 0.03%, 8 ohms)
40 watts/ch

Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power or 1 watt

Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt

Frequency Response -
Phono Input 20Hz-15kHz ± 3dB
Line Level Inputs 10Hz-40kHz ± 1dB
Damping Factor (20-20,000 Hz, 8 ohms) -

Input Sensitivity / Impedance 180

Phono Input 2.5mV / 47 kOhms -

Line Level Inputs 150 mV / 24 kOhms 2.5mV / 47 kOhms

Input Overload 150 mV / 24 kOhms

Phono Input -
Line Level Inputs 180mV

Preamp Output / Impedance 5V

Tone Controls - Bass / Treble 1V / 470 Ohms

Signal to Noise Ratio (IHF “A” weighted) ±6 dB at 100Hz / 10kHz

Phono Input -
Line Level Inputs 80 dB
100 dB

Power Requirements -
European Version 230 Volts, 50 Hz

Power Consumption 220 W, 36 W - Idle, 3.7 W - Standby

Dimensions (W, H, D) 437 x 72 x 342 mm
Panel Height 60 mm

Weight (net) 5.9 kg

12 volt Trigger - Yes

Remote Control - Yes

Inputs Phono, CD, Tuner, Aux 1, Aux 2, Media Player

Loudspeaker outputs On / Off A, B, A+B

Headphone output Yes - 3.5 mm jack

Rotel RA05SE Stereo Amplifier