Related Products
Check items to add to the cart or select all
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
Product Description
Quad QC24p Moving Magnet / Moving Coil (MM/MC) Valve Phono Stage Pre-Amplifier (ex-display)
For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording.
There are two options for adding such functionality to our valve pre-amplifiers. A solid-state module is available for the standard QC-twentyfour pre-amplifier (known as the QC-24 phono stage) which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later.
For the connoisseur however, there is the Quad twentyfour P dedicated valve phono stage. This has been designed for Quad by valve supremo Tim DeParavicini - probably the finest valve amplifier designer in the world today. It has been voiced by the finest ears in the industry and will add an entirely new dimension to your enjoyment of vinyl recordings.
Specifications:
Valve Complement: 4 x 6111
THD: ‹0.08% (A-weighted)
Frequency Response: 20Hz–20kHz (+0dB/-0.5dB)
Hum and Noise: Better than 60dB
Input Impedance:
Moving magnet : 47Ω
Moving coil : 10Ω
Stage Gain:
High sensitivity : 1.3mV (MM)/130uV (MC)
Medium sensitivity : 2.6mV (MM)/260uV (MC)
Low sensitivity : 5.2mV (MM)/520uV (MC)
Nominal output level
(ref 5.2mV, MM, Low) : 1.0
Inputs : Selectable MC/MM cartridge
Outputs : 1 x fixed line level, 1 x variable line level
Power consumption : 15 VA maximum
Quad QC24p MM / MC Valve Phono Stage (ex-display)
For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording.
There are two options for adding such functionality to our valve pre-amplifiers. A solid-state module is available for the standard QC-twentyfour pre-amplifier (known as the QC-24 phono stage) which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later.
For the connoisseur however, there is the Quad twentyfour P dedicated valve phono stage. This has been designed for Quad by valve supremo Tim DeParavicini - probably the finest valve amplifier designer in the world today. It has been voiced by the finest ears in the industry and will add an entirely new dimension to your enjoyment of vinyl recordings.
Specifications:
Valve Complement: 4 x 6111
THD: ‹0.08% (A-weighted)
Frequency Response: 20Hz–20kHz (+0dB/-0.5dB)
Hum and Noise: Better than 60dB
Input Impedance:
Moving magnet : 47Ω
Moving coil : 10Ω
Stage Gain:
High sensitivity : 1.3mV (MM)/130uV (MC)
Medium sensitivity : 2.6mV (MM)/260uV (MC)
Low sensitivity : 5.2mV (MM)/520uV (MC)
Nominal output level
(ref 5.2mV, MM, Low) : 1.0
Inputs : Selectable MC/MM cartridge
Outputs : 1 x fixed line level, 1 x variable line level
Power consumption : 15 VA maximum
Quad QC24p MM / MC Valve Phono Stage (ex-display)
More Information
| Manufacturer link | Quad QC24p |
|---|
Also Recommended
Contact us for more product recommendations!
